Jewell

• Floor-to-ceiling height - 8’-0” - 9'-0"
• Roof pitch: 12:12
• Foundation insulation - R-20 minimum, for below grade conditions. Minimum of crawl space required for modular assemblies
• Walls - typical double stud assembly, zip sheathing - all seams taped - R-40
• Roof - loose fill or dense pack cellulose + foam, depending on attic conditioning for an R-60 assembly
• Windows - Triplepane Casements or Tilt and Turn windows
• Exterior Doors - Insulated with triple-lock system, typical

• Air source heatpump heating and cooling
• ERV systems
• Panasonic WhisperGreen bath fans
• Under 300cmf hood for range
• HeatPump Hot Water Heater

Typically installed in factory:

• Kitchen and bath cabinetry and fixtures, windows and interior trim, interior doors and trim

‍Typically installed on-site:

• Floors, kitchen countertops, siding, specialty fixtures, tile, any finishes outside of building footprint (decks, porches, etc)

Step 1

• Sign BBH contract + deposit
• Outline calendar for project

‍Step 2

• Design, pricing, finishes meetings
• Scope of work document for the particular project
• Excavation | Siting | Connections | Utilities Assessment | Septic Rating | Panel Size/Loads
• Finalize finish choices

‍Step 3 (Builder present)

• Construction contract signed with builder and factory deposit made
• Dates set for estimated competition
• Build schedule and payment schedule defined
• Deposit goes into the factory to initiate build/ordering
• Final selections submitted with deposit

‍Step 4 (Site work)

• Excavation of utility trenches
• Digging/setting of piers
• Mounting of beam
• Septic and/or well if needed

‍Delivery

• Home Delivered and Remainder Paid To Builder

‍Finish Out

• Buildout/completion of decks
• Soffits at gable ends
• Connections to utilities
• Finishing touches

‍Move in!