• Standard footprint - 15'6" x 32-34'
• Floor-to-ceiling height - 8’-0”
• Roof pitch - 12:12 Gable, 4:12 Shed, Flat
• Fully insulated and sealed floor plate, just with drain lines and water feeds stubbed out. - R-40 minimum
• Walls - typical double stud assembly, plywood sheathing with breathable, self-adhering water & air barrier- R-40
• Roof - R60 insulation - loose fill or dense pack cellulose & rigid foam, depending on roofline
• Windows - Paradigm Casements OR Logic Tilt and Turn
• Door - Thermatru fiberglass full-lite door with triple-lock system

• Ductless Air Source Heat Pump
• Lunos HRV systems - 1 pair in bedroom/bath and 1 pair in living space
• Panasonic WhisperGreen bath fan
• Under 300 cfm hood for range
• Electric Hot Water Heater

Design Palettes

• Standard
• Coastal
• Contemporary

Fixtures

• Kitchen: Merillat Classic Cabinets, Laminate Countertops
• Bath: Merillat Classic Cabinets, Wolf cultured marble tops
• Plumbing: American Standard/Kohler Fixtures
• Flooring: Coretec LVT
• Trim: "Craftsman" Trim package, painted white
• Interior Doors: Masonite
• Windows: Paradigm Casements OR Logic Tilt and Turn
• Exterior: Vinyl Board and Batten Siding, Asphalt Architectrual Shingle roof
• Door: Thermatru fiberglass full-lite door with triple-lock system

Step 1

• ‍Sign BrightBuilt Home contract + send deposit
• Outline calendar for project
• Builder intro and Schedule site meeting

‍Step 2

• 1 Design meeting to review site, drawings, select Finish palette
• Scope of work document for the particular project.
• Excavation | Siting | Connections | Utilities Assessment | Septic Rating | Panel Size/Loads
• Request Pricing

‍Step 3 (Builder present)

• Construction contract signed with builder and factory deposit made
• Dates set for estimated competition
• Build schedule and payment schedule defined
• Deposit goes into the factory to initiate build/ordering
• Final selections submitted with deposit

‍Step 4 (Site work)

• Excavation of utility trenches
• Digging/setting of piers
• Mounting of beam
• Septic and/or well if needed

‍Delivery

• Home Delivered and Remainder Paid To Builder

‍Finish Out

• ‍Buildout/completion of decks
• Soffits at gable ends
• Connections to utilities
• Finishing touches

‍Move in!

• Standard footprint - 14' x 30'
• Floor-to-ceiling height - 8’-0”
• Roof pitch - 13:12
• Fully insulated and sealed floor plate, just with drain lines and water feeds stubbed out. - R-40 minimum
• Walls - typical double stud assembly, zip sheathing - all seam taped - R-40
• Roof - 16” of dense pack cellulose for an R-60 assembly
• Windows - Mathews Brothers/Paradigm Casements or Logic Tilt and Turn windows
• Door - Thermatru fiberglass full-lite door with triple-lock system

• Electric Baseboard heat throughout
• Lunos HRV systems - 1 pair in living space
• Panasonic WhisperGreen bath fan
• Under 300 cmf hood for range
• Electric or HeatPump Hot Water Heater

Kitchen + Baths

• Cabinets: Merillat Classic or Masterpiece - with soft close drawers & doors, dovetail full-plywood construction
• Counters: Stone
• Sinks: Clients choice - to go with counter surface as appropriate
• Faucets: Clients choice
• Shower/Tubs: 2-piece or tile, clients choice

Flooring

• All but bathroom: Pre-finished hardwood or pre-engineered
• Bathroom: Tile or marmoleum, clients choice

Trim

• Baseboard: 1x6 flat profile, painted white
• Windows: "Craftsman" trim package - 1x4 side casings, sill, 1x3 apron, & 1x4, 5/4 header w/ 3/4" overhang - all primed and painted white
• Doors: Similar profile to windows - 1x4 sides, 1x4 5/4 header w/ 3/4" overhang

Interior Doors

• Masonite hollow-core, Choice of profile
• Schage levers or knobs, clients choice of finish

Exteriors

• Siding: Clients choice
• Roof: Architectural asphalt shingle or standing seam metal
• Trim
• ~Windows: Integrated lineals
• ~Door: Azek

Step 1

• ‍Sign BBH contract + deposit
• Outline calendar for project

‍Step 2

• Design, pricing, finishes meetings
• Scope of work document for the particular project.
• Excavation | Siting | Connections | Utilities Assessment | Septic Rating | Panel Size/Loads
• Finalize finish choices

‍Step 3 (Builder present)

• Construction contract signed with builder and factory deposit made
• Dates set for estimated competition
• Build schedule and payment schedule defined
• Deposit goes into the factory to initiate build/ordering
• Final selections submitted with deposit

‍Step 4 (Site work)

• Excavation of utility trenches
• Digging/setting of piers
• Mounting of beam
• Septic and/or well if needed

‍Delivery

• Home Delivered and Remainder Paid To Builder

‍Finish Out

• ‍Buildout/completion of decks
• Soffits at gable ends
• Connections to utilities
• Finishing touches

‍Move in!

• Standard 1 bedroom footprint - 14’ x 40’
• Standard 2 bedroom footprint - 14’ x 54’
• Floor-to-ceiling height - 8’-0”
• Roof pitch - 13:12
• Fully insulated and sealed floor plate, just with drain lines and water feeds stubbed out. - R-40 minimum
• Walls - typical double stud assembly, zip sheathing - all seam taped - R-40
• Roof - 16” of dense pack cellulose for an R-60 assembly
• Windows - Mathews Brothers/Paradigm Casements or Logic Tilt and Turn windows
• Door - Thermatru fiberglass full-lite door with triple-lock system

• Electric Baseboard heat throughout
• Lunos HRV systems - 1 pair in bedroom and 1 pair in living space
• Panasonic WhisperGreen bath fan
• Under 300 cmf hood for range
• Electric or HeatPump Hot Water Heater

Kitchen + Baths

• Cabinets: Merillat Classic or Masterpiece - with soft close drawers & doors, dovetail full-plywood construction
• ‍Counters: Stone
• ‍Sinks: Clients choice - to go with counter surface as appropriate
• ‍Faucets: Clients choice
• ‍Showers/Tubs: 2-piece or tile, clients choice

‍Flooring

• ‍All but bathroom: Pre-finished hardwood or pre-engineered
• ‍Bathroom: Tile or marmoleum, clients choice

‍Trim

• ‍Baseboard: 1x6 flat profile, painted white
• ‍Windows: “Craftsman” trim package - 1x4 side casings, sill, 1x3 apron, & 1x4, 5/4 header w/ 3/4” overhang - all primed and painted white
• ‍Doors: Similar profile to windows - 1x4 sides, 1x4 5/4 header w/ 3/4” overhang

Interior Doors

• Masonite hollow-core, Choice of profile
• Schage levers or knobs, clients choice of finish

Exteriors

• ‍Siding: Clients choice
• ‍Roof: Architectural asphalt shingle or standing seam metal
• Trim
• ~Windows: Integrated lineals
• ~Door: Azek

Step 1

• ‍Sign BBH contract + deposit
• Outline calendar for project

‍Step 2

• Design, pricing, finishes meetings
• Scope of work document for the particular project.
• Excavation | Siting | Connections | Utilities Assessment | Septic Rating | Panel Size/Loads
• Finalize finish choices

‍Step 3 (Builder present)

• Construction contract signed with builder and factory deposit made
• Dates set for estimated competition
• Build schedule and payment schedule defined
• Deposit goes into the factory to initiate build/ordering
• Final selections submitted with deposit

‍Step 4 (Site work)

• Excavation of utility trenches
• Digging/setting of piers
• Mounting of beam
• Septic and/or well if needed

‍Delivery

• Home Delivered and Remainder Paid To Builder

‍Finish Out

• ‍Buildout/completion of decks
• Soffits at gable ends
• Connections to utilities
• Finishing touches

‍Move in!